Difference between revisions of "User:Sajuk"

From LinuxWorks Minetest Server Wiki
Jump to navigation Jump to search
(Created page with " Some guides that I found missing ... Digtron Build a digtron 1x crate - to transport ditron from place to place. 1x control module (simple, or automatic) 1 (-3)...")
 
Line 10: Line 10:
 
Build a digtron
 
Build a digtron
  
1x crate      - to transport ditron from place to place.  
+
1x crate      - to transport ditron from place to place. <br>
1x control module (simple, or automatic)
+
1x control module (simple, or automatic) <br>
1 (-3) x inventory storage,  to store the minerals
+
1 (-3) x inventory storage,  to store the minerals. <br>
1 x  combined storage    , fuel injector and storing useful stuff( torches/glow blocks, extra screw driver,  fuel,  boxes, axe, showel, emergency food, etc ...)
+
1 x  combined storage    , fuel injector and storing useful stuff( torches/glow blocks, extra screw driver,  fuel,  boxes, axe, showel, emergency food, etc ...)<br>
1 x rotation axel    - to rotate whole structure once  
+
1 x rotation axel    - to rotate whole structure once <br>
1 x builder module - to place torches  
+
1 x builder module - to place torches <br>
min. 6+ x digger heads.  (width x height)     
+
min. 6+ x digger heads.  (width x height)    <br>
  
  
Building guide:  
+
Building guide: <br>
Place digger heads such that the rotating/digging side is in front (orange connector rear side).
+
Place digger heads such that the rotating/digging side is in front (orange connector rear side).<br><br>
  
Note that width should be symmetrical around the central axis and rotation axel should be placed in centr in order to conveniently rotate the digtron around its axis (See Fig.1).  
+
Note that width should be symmetrical around the central axis and rotation axel should be placed in centr in order to conveniently rotate the digtron around its axis (See Fig.1). <br>
Dimensions of digging face should be  (height x ( 2 x half-width + 1) ).
+
Dimensions of digging face should be  (height x ( 2 x half-width + 1) ).<br>
 
   
 
   
Height of digitron: up to the builder - depends if you need to reach the ceiling.   
+
Height of digitron: up to the builder - depends if you need to reach the ceiling.  <br>
Should be also symmetric around the central axis to avoid rotation errors (dashed lines on Fig 1.).
+
Should be also symmetric around the central axis to avoid rotation errors (dashed lines on Fig 1.).<br>
  
  
Falling gravel sand damages structure blocks (grey on Fig. 1) if they are uncovered from top. Make sure they are covered by other blocks (i.e. inventory).  
+
Falling gravel sand damages structure blocks (grey on Fig. 1) if they are uncovered from top. Make sure they are covered by other blocks (i.e. inventory). <br>
  
Place buildin module to the edges of the digtron to place items generating light :  
+
Place buildin module to the edges of the digtron to place items generating light : <br>
- top  Extrusion: 1,  Period: 10-15 ; Offset: 0, Facing: 0
+
- top  Extrusion: 1,  Period: 10-15 ; Offset: 0, Facing: 0<br>
  
- left:
+
- left: <br>
- right:
 
  
Following guide for 5x4 digtron. 
+
- right:<br>
  
Figure 1.  Side, back and top view of 7x5 digtron. 
 
  
Notes:
+
Figure 1.  Scheme for 7x5 digtron. Side, back and top view.
- Digtorn moves relative to control unit.  
+
 
- Surplus cobbles, which do not fit to the inventory, will bedroped behind control unit.  
+
Notes:<br>
- Falling gravel sand damages structure blocks (grey on fig.). Make sure they are covered by other blocks (i.e. inventory).  
+
- Digtorn moves relative to control unit. <br>
- Use screwdriver to alter the rotation direction.   
+
- Surplus cobbles, which do not fit to the inventory, will be droped behind the control unit.  
- Sign on rotation axis (<) clockwise,    (>) anticlockwise.  Use screwdriver to alter it.   
+
- Falling gravel sand damages structure blocks (grey on fig.). Make sure they are covered by other blocks (i.e. inventory). <br>
- Smaller/larger digtrons should follow the symetry between half-width (Wh)  and rotation axel (Fig.1 dashed blocks).
+
- Use screwdriver to alter the rotation direction.  <br>
 +
- Sign on rotation axis (<) clockwise,    (>) anticlockwise.  Use screwdriver to alter it.  <br>
 +
- Smaller/larger digtrons should follow the symetry between half-width (Wh)  and rotation axel (Fig.1 dashed blocks).<br>

Revision as of 22:15, 26 April 2020


Some guides that I found missing ...


Digtron

Build a digtron

1x crate - to transport ditron from place to place.
1x control module (simple, or automatic)
1 (-3) x inventory storage, to store the minerals.
1 x combined storage , fuel injector and storing useful stuff( torches/glow blocks, extra screw driver, fuel, boxes, axe, showel, emergency food, etc ...)
1 x rotation axel - to rotate whole structure once
1 x builder module - to place torches
min. 6+ x digger heads. (width x height)


Building guide:
Place digger heads such that the rotating/digging side is in front (orange connector rear side).

Note that width should be symmetrical around the central axis and rotation axel should be placed in centr in order to conveniently rotate the digtron around its axis (See Fig.1).
Dimensions of digging face should be (height x ( 2 x half-width + 1) ).

Height of digitron: up to the builder - depends if you need to reach the ceiling.
Should be also symmetric around the central axis to avoid rotation errors (dashed lines on Fig 1.).


Falling gravel sand damages structure blocks (grey on Fig. 1) if they are uncovered from top. Make sure they are covered by other blocks (i.e. inventory).

Place buildin module to the edges of the digtron to place items generating light :
- top Extrusion: 1, Period: 10-15 ; Offset: 0, Facing: 0

- left:

- right:


Figure 1. Scheme for 7x5 digtron. Side, back and top view.

Notes:
- Digtorn moves relative to control unit.
- Surplus cobbles, which do not fit to the inventory, will be droped behind the control unit. - Falling gravel sand damages structure blocks (grey on fig.). Make sure they are covered by other blocks (i.e. inventory).
- Use screwdriver to alter the rotation direction.
- Sign on rotation axis (<) clockwise, (>) anticlockwise. Use screwdriver to alter it.
- Smaller/larger digtrons should follow the symetry between half-width (Wh) and rotation axel (Fig.1 dashed blocks).